The Carrie Activity Base, model PC 4641C, is designed to elevate and add mobility to the Carrie Seat for peer interaction and activities. The base is designed for use with the Elementary and Pre-School Carrie Seats (see separate entry). Rear wheels allow for moving the seat around the immediate area.
The Child Carrier is a child transport chair designed to enable a wheelchair user to carry a child on the wheelchair, to be close to the child, and keep the child occupied. The device consists of a standard child's swing seat mounted on a 3/4-inch copper plumbing pipe. A wire frame for a sun awning is mounted on the top of the frame. The unit mounts into the wheelchair arm rests. PROTOTYPE DEVELOPMENT: Designed by John Duffus for wheelchair users who have difficulty holding a child or moving abo
The Cruiseaire is a child's transport chair designed for use with children with mobility disabilities. FRAME (WxHxL): Both models have a lightweight folding frame with a grey hammertone finish. Open, odel CA11 is 20 x 37 x 31 inches without footrests and model CA13 is 21.5 x 37 x 33 inches without footrests. Folded, both models are 13 x 11 x 47 inches. An optional anatomic back frame is available on both models which stabilizes the head and neck to assist in the development of righting reflexes.
The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests
The EZ Rider Convertible is an attendant-propelled child transport chair or stroller that converts to a standard child manual wheelchair. This chair is designed for use with children ages 5 to 13 who have some upper body control. FRAME (LxWxH): Folding, lightweight, flexible steel frame with black powder coat finish. Models 174MBC and 174TBC have been crash tested and include tie-down brackets. Models 174MC and 174MBC are 44 x 20.5 x 36.5 inches open and 44 x 13 x 12.25 inches folded; models 174
The Independence Push Chair is a stroller and transport chair designed for use by children with lower extremity, mobility, or neurological disabilities or cerebral palsy. This chair maneuvers over all types of terrain and has a multi-position sun canopy with clear window. FRAME (HxLxW): 43.75 x 55 x 27.5 inches when assembled; 18 x 38.125 x 27.5 inches when folded (with wheels). The folding frame can be folded with one hand for transport or storage. SEAT: 12-inch wide padded seat with adjustabl
The Mart Cart Shopper's Aid is a transport wheelchair designed for use by shoppers with mobility disabilities. This lightweight chair is designed to fit behind a standard shopping cart (not included), with space to seat passengers of all sizes, including one or two children or a single adult. Its universal mounting system attaches to the chair to a shopping cart by tightening a few bolts. FRAME: Available frame colors are red, blue, green, gray, or chrome. A platform under the seat provides addi
Chair has chromed tubular steel base with casters on the front and small wheels in rear. ABS plastic seat and back shells attach to frame. Vinyl or Naugahyde bean bag, stitched on three sides and zippered on fourth, is one-third filled with polystyrene beads and velcroed to seat and back. Seat is usually reclined at 15 degrees from horizontal; back adjusts from horizontal to nearly vertical with ratchet mechanism. Rear push handles. One size only, with bean bag mattress approximately 4 feet long
The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The
The Scooter Trailer is a wheelchair cart designed to equip a powered scooter to tow a child and/or cargo. The trailer is mounted on a single swiveling castor wheel. The trailer is attached to the scooter by means of a fixed hitch. There is a wire basket on the trailer enclosing a bicycle baby seat which is mounted on a wooden platform. The fixed hitch/wheel castor configuration allows greater maneuverability when reversing. PROTOTYPE DEVELOPMENT: Designed by Jim Rees for mothers who use scooter