Camera Mount for Wheelchair

Results: 14

"chairpod" Camera Support.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Aids in the inability to hold a standard 35mm SLR camera and reduces time in setting up a standard tripod. Camera is mounted to a wooden cone which sits on wooden piece of board that may be clamped to wheelchair or chair. COMMENTS: "Chairpod" is excellent for severely limited no hand or one hand use. Those without hands would require assistance in focusing camera. SKILLS REQUIRED: Woodworking. AUTHOR: Gugerty, J J; Tindall, L W TITLE: Tools, Equipment


The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,

Adapted Camera Mount With Tripod, And Pan-Tilt Functions For A Wheelchair Bound Photographer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modifications to professional camera equipment to allow a quadriplegic with little muscle strength to continue a hobby of photography. Describes and provides drawings illustrating construction, limitations and functions of a camera mount head, a support frame and adaptations concerning a holding block for cable release, holding block for electronic shutter release, quick focusing ring, angle bracket and carrier bracket. Lists camera equipment and acces

Birdie Buddy

---- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair mount for a camera and binoculars for an avid photographer and birdwatcher with quadriplegia. The Birdie Buddy clamps securely to a bar on the wheelchair base frame, holds a camera or binoculars at eye level, and folds down along the side of the wheelchair when not in use. This device supports the weight of the camera or binoculars, convenient switching between the two pieces of equipment, and an adjustable viewing angle. T

Bogen Multi Position Support Arm & Super Clamp

The Bogen Multi-position Support Arm and Super Clamp are mounting hardware for communicators and other accessories designed to be mounted to a table or wheelchair. The Support Arm has a fully articulated arm (three universal joints) with 90 degree pivotable and 360 degree rotatable ends, and an elbow that rotates 360 degrees. The adjustable, one-control handle located at the elbow joints locks all three joints firmly. The arm can be mounted permanently, or used with the Super Clamp. The Super Cl

Camera Holder

This Camera Mount is a wheelchair attachment. It enables user to rest elbows on armrest to focus and operate either photo or video camera. The Camera Mount is made of wood and is attached to the wheelchair arms with an aluminum attachment. It is adjustable to wheelchair widths, however, is designed to be used on E&J or wheelchairs with similiar armsrest. When ordering, individuals will needed to specify wheelchair make and model and whether use is for camera, or video.

Holder To Attach Camera To A Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to take photographs. The holder is made from 19 millimeter chrome-plated steel curtain rods and clamps to the wheelchair footplate strut. It has a horizontal arm which passes from the footplate strut under the user's right leg and a vertical arm that comes up on the user's right side. The arm is long enough to put the camera at eye level. The camera is mounted on a horizontal arm that pivots from the vertical arm. The mounting

Magic Arm

The Magic Arm is a mounting attachment for wheelchairs for positioning cameras, joysticks, or other adaptive equipment. This flexible arm has three joints, a 90 degree pivoting end, a 360 degree rotating end, and a 360 degree rotating elbow. Both ends have studs that are tapped and fit any standard 5/8 inch socket. Includes a flash shoe and a camera mounting bracket. This device is designed for use with the Beneficial Designs Super Clamp (see separate entry). DIMENSIONS: Extended length is 19.7

Mount 'n Mover

The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a

Single Switch Remote Controlled Camera

---- PROTOTYPE --------- PURPOSE: To create a prototype of a single switch remotely controlled camera for an individual with cerebral palsy. A young man with cerebral palsy who had no use of his hands wished to independently operate a camera. Mounting the camera to the young man’s wheelchair was straightforward. The remote control cable for his camera required two switch actions, one to focus the camera and the other to simultaneously trigger the shutter. The young man currently used a switch ar

Super Clamp

The Super Clamp is a mounting clamp for accessories designed to attach to wheelchair arms or any other kind of frame. The jaws of the clamp open up to a maximum of two inches wide. The clamp has a receptacle to screw into photographic or other equipment. The device is made of cast alloy with a high strength to weight ratio. The jaws are friction lined and screw operated. The clamp has a special detent operated safety lock that holds accessories in place even if the locking mechanism is not tight

Tilt'n Turner

The Tilt 'n Turner is a communicator or computer mounting kit for wheelchair or a camera mount for wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The device can also be used to mount trays, easels, reading stands, remote controls and more. The device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt and a paddle to unlock the joint to rotate the attached tray or device 360 degrees. There are 12 memor

Wheelchair Camera Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom wheelchair camera mount for a photographer with hemiplegia related to stroke and limited use of his right arm. This individual cannot simultaneously hold his camera firmly and press the shutter, particularly as he uses large lenses which are quite heavy, and using a tripod to hold the camera doesn’t work either, as it’s difficult to set this up with one hand. Therefore, a custom adaptation solution of creating a wheelchair camera m

Wheelchair Camera Mount

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to take digital photographs. The user required a mount that would hold the camera very steady, but still allow her to use a tripod and to have the mount moved from a powered wheelchair to a manual wheelchair as required. A holder was designed with a stainless steel vertical arm mounted on the right front caster of each chair. For additional stability, the manual chair had an additional bracing clamped to the frame at wheel and

Parent Category: Photography

Driving Walking/Biking Public Transit  Get Directions